A Frigidaire range that is burner will not light is one of the calls we get from Lafayette Park and the rest of Tallahassee. One burner clicks and never lights, or every burner clicks and only some catch. You may smell a little gas and then nothing. This guide explains what that pattern usually means on a Frigidaire, which checks are safe to do yourself, and when the next step is a diagnosis instead of another afternoon of guessing. If you want the short version for this appliance, start with our range repair page, or call (850) 755-9600.
What a Frigidaire looks like when it is burner will not light
One burner clicks and never lights, or every burner clicks and only some catch. You may smell a little gas and then nothing. On Frigidaire equipment the same complaint often includes a code, a blink pattern, or a sound that only happens at one part of the cycle. Write that down before you unplug anything. Gallery and standard Frigidaire lines share symptoms but not always parts. The full model number, not just the brand, is what parts are ordered from.
When we hear that a Frigidaire range is burner will not light, the useful first split is whether the problem is constant or only at one point in the cycle. Constant faults point at a part that has opened or seized. Faults that appear halfway through point at heat, water level, or a sensor that only fails under load. Homeowners in Lafayette Park usually notice the problem at the worst time: after a grocery run, on a Sunday laundry day, or the night before they need the oven. The machine rarely failed in that exact minute. The symptom got loud enough to ignore no longer.
What is going on inside the machine
Gas surface burners need a port that is clear, a cap that is seated, and a spark at the right spot. Spills clog the ports. A wet igniter after cleaning will click without lighting until it dries. If one burner lights with a match but will not spark, the igniter or the switch for that position is the likely fault. If no burner sparks, look at the spark module and the wiring that feeds it. A strong gas smell with no attempt to light is a leak, not a dirty port.
That general path still has a Frigidaire twist. Gallery and standard Frigidaire lines share symptoms but not always parts. The full model number, not just the brand, is what parts are ordered from. A board, a sensor, and the part that actually moves air, water, or heat can all produce a burner will not light complaint. Replacing the most expensive of those first is how a simple repair turns into a second visit.
If you want a plain-language version of a related complaint, read our Tallahassee troubleshooting guide. The same appliance often has two symptoms that share one cause, and chasing only the one you noticed first misses it.
Why this shows up in Lafayette Park
Lafayette Park kitchens deal with long cooling seasons, pollen, and the afternoon storms that blink the power. Those three things show up on Frigidaire appliances as extra run time, dirty airflow, and controls that misbehave after the lights come back.
Humidity in Leon County loads moisture into every gasket, vent, and drain. A Frigidaire range that was borderline in the spring will show a burner will not light complaint once the house stays closed up and the air conditioning runs all day. Pollen and pet hair do the same thing to coils, fans, and dishwasher filters.
Power blinks matter as much as heat. A storm that drops the lights for two seconds is enough to scramble a Frigidaire control or leave an ice maker, clock, or cycle in a half-finished state. If the problem started the evening of a storm, say so when you request service.
Checks that are reasonable to do yourself
These checks do not require opening a sealed system, a gas valve, or a live electrical compartment. If a step needs a panel off, unplug the range or shut the breaker first. Stop when you are unsure. The point is to rule out the simple causes and to collect better information, not to finish the repair on the floor.
None of these steps replaces a diagnosis when the Frigidaire is burner will not light and the basic items are already fine. They do keep you from paying for a visit that a kinked hose or a filmed-over lint screen would have solved.
- Seat the cap. A crooked cap clicks forever.
- Dry a wet igniter and try again.
- Clear clogged ports with a wooden toothpick, not a pin that enlarges the hole.
- See if a match lights the burner. If it does, you have gas and you lack spark.
- Note whether the clicking is at every burner position.
- Stop and air out the kitchen if gas odor builds instead of clearing.
Parts that usually sit behind this symptom
On a Frigidaire range, the burner will not light pattern clusters around a short list of parts. The right one depends on the model and on what the checks above already eliminated. This is the list we work from, not a shopping list.
If gas odor stays after the knobs are off, leave the house and call the utility. Do not keep clicking the igniter. If you smell gas, see smoke, or the cabinet is hot and electrical, stop using it and call (850) 755-9600. Those are not waiting-until-Monday problems.
- Igniter electrode cracked or grounded.
- Burner switch that no longer sends spark or gas.
- Spark module.
- Clogged burner base.
- Cap that is warped from a spill.
- Wire burned off at the igniter.
Sounds, codes, and what to write down
Frigidaire uses codes and sounds as shorthand, and the shorthand is only useful if you record it. A click every few seconds, a hum with no movement, a single thump per revolution, or a code that returns after a reset are four different repairs. Gallery and standard Frigidaire lines share symptoms but not always parts. The full model number, not just the brand, is what parts are ordered from.
Take a photo of the model tag and of the display. Note whether the range is gas or electric if it heats, and whether a washer is a front-loader or a top-loader. Tell us the neighborhood — Lafayette Park is enough to start — and when the problem began. That is the same information we ask for on the service request form.
Repair or replace
A Frigidaire range that is burner will not light is not automatically at the end of its life. Fans, pumps, igniters, elements, locks, sensors, and valves are ordinary repairs. A sealed refrigeration system, a tub bearing on a low-priced washer, or a range with a ruined cooktop and a dead oven are harder conversations. The split is the cost and the availability of the part against the age and the condition of the rest of the machine.
We do not quote a replace-or-repair answer from the brand name alone. A clean Frigidaire with one failed part is often worth fixing. A machine with rusted water connections, a second noise, and missing model data is a weaker candidate. You should hear that distinction before any work starts. The FAQ covers how we talk through that choice.
How this connects to other repairs
Appliance problems travel in pairs. A washer that will not spin makes the dryer look slow. A refrigerator door seal that leaks makes frost, then a puddle, then a warm fresh-food section. A dishwasher that will not drain gets described as a machine that will not start. If your Frigidaire has a second symptom, mention it. Read Frigidaire electric burner dead and Frigidaire weak or yellow flame before you assume you have two unrelated failures.
Coverage is across Tallahassee, including Lafayette Park. The service area page lists the neighborhoods, and the Frigidaire brand page links the appliances we work on for this brand. For the full symptom list, use range repair.
When the checks above do not restore the Frigidaire, call (850) 755-9600 or send the model number and the symptom through the request form. Include any code, whether the unit is gas or electric, and what you already tried. That is enough to start a real diagnosis instead of a guess.
Still not working?
Call (850) 755-9600 or send the brand, model, and what the appliance is doing.